Configuring Wan Interfaces; Configuring An Ethernet Interface - HP MSR SERIES Configuration Manual

Configuring WAN interfaces

This chapter describes how to configure the following interfaces on the Web interface:
Ethernet interfaces.
•
SA interfaces.
•
ADSL/G.SHDSL interfaces.
•
• CE1/PRI interfaces.
CT1/PRI interfaces.
•

Configuring an Ethernet interface

An Ethernet interface or subinterface supports the following connection modes:
Auto—The interface acts as a DHCP client to get an IP address through DHCP.
•
• Manual—The IP address and subnet mask are configured manually for the interface.
PPPoE—The interface acts as a PPPoE client. PPPoE provides access to the Internet for hosts in an
•
Ethernet through remote access devices. It also implements access control and accounting on a
per-host basis. As it is cost-effective, PPPoE gains popularity in various applications, such as
residential networks.
To configure an Ethernet interface:
1. Select Interface Setup > WAN Interface Setup from the navigation tree.
Figure 28 WAN interface configuration page
2. Click the
3. Configure the Ethernet interface, as described in
icon for the Ethernet interface.
Table 24, Table
43
25, and Table 26.