Configuring Advanced Settings; Setting A District Code; Channel Busy Test - HP MSR SERIES Configuration Manual

Hide thumbs Also See for MSR SERIES:

Table of Contents

Configuring advanced settings

Radio frequencies for countries and regions vary based on country regulations. A district code

determines characteristics such as frequency range, channel, and transmit power level. Configure the

valid country code or area code for a WLAN device to meet the specific country regulations.

Select Interface Setup > Wireless > District Code from the navigation tree.

Figure 130 Setting a district code

Table 77 Configuration item

District Code

If the list is grayed out, the setting is preconfigured to meet the requirements of the target market and is

locked. It cannot be changed.

Support for district code depends on your device model.

A channel busy test is a tool to test how busy a channel is. It tests channels supported by the district code

one by one, and provides a busy rate for each channel. This avoids the situation that some channels are

heavily loaded and some are idle.

During a channel busy test, routers do not provide any WLAN services. All the connected clients are

disconnected and WLAN packets are discarded.

To configure a channel busy test:

Select Interface Setup > Wireless Service > Advanced > Channel Busy Test from the navigation

Select a district code.

Configure the valid district code for a WLAN device to

meet the country regulations.

Show Quick Links

Table of Contents