Configuring Host Resources - HP MSR SERIES Configuration Manual

Figure 403 Global configuration page
2. Configure the global parameters as described in
3. Click Apply.
Table 172 Configuration items
Item
Start IP
End IP
Subnet Mask
Gateway IP
Timeout
WINS Server IP
DNS Server IP
Allow clients to
intercommunicate
Permit only access to
VPN
Show Network
Services by

Configuring host resources

1. Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree.
2. Click the Host Configuration tab to view existing host resources.
Description
Specify the IP address pool from which the gateway assigns IP addresses for clients'
virtual network adapters.
Enter the subnet mask to be assigned to a client's virtual network adapter.
Enter the default gateway IP address to be assigned to a client's virtual network
adapter.
Set an idle timeout for client connections. If the gateway does not receive any packet
from a client during this period, the gateway disconnects the client.
Enter the WINS server IP addresses to be assigned to clients' virtual network adapters.
Enter the DNS server IP addresses to be assigned to clients' virtual network adapters.
Select this item to allow IP access between online users.
Select this item to allow online users to access only the VPN.
If you do not select this item, online users can access both the VPN and the Internet.
Specify how to display network services for online users.
•
Description: Shows the description information of the network services that host
resources allow users to access.
•
IP address: Shows the destination address, subnet mask, and protocol type of the
network services that host resources allow users to access.
399
Table 172.