Setting Radio Edca Parameters For Aps - HP MSR SERIES Configuration Manual

Table 69 Configuration items
Item
Client Number
Channel Utilization

Setting radio EDCA parameters for APs

1. Select Interface Setup > Wireless > Wireless QoS from the navigation tree.
2. Click the QoS Service tab.
3. Click the icon in the Operation column for the desired radio in the list.
4. Find the priority type (AC_BK is taken for example here) to be modified in the radio EDCA list.
5. Click the corresponding icon in the Operation column.
Figure 117 Setting radio EDCA parameters
Table 70 Configuration items
Item
Radio
Priority type
AIFSN
TXOP Limit
ECWmin
ECWmax
No ACK
Table 71 Default radio EDCA parameters
AC
AC-BK
Description
Users-based admission policy, namely, maximum number of clients allowed to
be connected. A client is counted only once, even if it is using both AC-VO and
AC-VI.
By default, the users-based admission policy applies, with the maximum
number of users being 20.
Channel utilization-based admission policy, namely, the rate of the medium
time of the accepted AC-VO and AC-VI traffic to the valid time during the unit
time. The valid time is the total time during which data is transmitted.
Description
Selected radio.
Priority type.
Arbitration inter-frame spacing number used by the device.
Transmission opportunity limit used by the device.
Exponent form of CWmin used by the device.
Exponent form of CWmax used by the device.
If you select the box before No ACK, the No ACK policy is used by the device.
By default, the normal ACK policy is used by the device.
TXOP Limit AIFSN
0 7
ECWmin
4
121
ECWmax
10