Configuration Procedure - HP MSR SERIES Configuration Manual

CPE address
•
• CPE username
CPE password
•
For the TR-069 mechanism, see Network Management and Monitoring Configuration Guide in HP MSR
Router Series Configuration Guides (V5).

Configuration procedure

The TR-069 parameters of CPE can be configured automatically through ACS remote management, and
also can be configured manually through Web, which is described in detail in this section.
To configure TR-069 manually:
1. From the navigation tree, select System Management > TR-069.
The TR-069 configuration page appears.
2. Configure TR-069 as described in
3. Click Apply.
Figure 518 TR-069 configuration page
Table 198 Configuration items
Item
TR-069
URL.
Username.
ACS
Password.
CPE Username.
Table 198.
Description
Enable or disable TR-069.
TR-069 configurations can take effect only after you enable TR-069.
Configure the URL used by a CPE to initiate a connection to the ACS.
Configure the username used by a CPE to initiate a connection to the ACS.
Configure the password used by a CPE to initiate a connection to the ACS.
You can specify a username without a password that is used in the authentication.
If so, the configuration on the ACS and that on the CPE must be the same.
Configure the username used by the CPE to authenticate the connection sent from
the ACS.
490