Configuring Server Information Management - HP MSR SERIES Configuration Manual

Hide thumbs Also See for MSR SERIES:
Table of Contents

Advertisement

Item
IPv4 Address Bound with
the Media Stream
Interface Bound with the
Media Stream
Signaling Stream Binding
Mode
IPv4 Address Bound with
the Signaling Stream
Interface Bound with the
Signaling Stream
The following table describes how source address binding works upon different conditions:
Condition
Configure a source address binding when
ongoing calls exist.
The bound source interface or the interface
whose IP address is set as the source
address is shut down.
The bound static IP address is removed or
modified, or the bound interface is
removed.
The bound interface is disconnected.
Configure a source address binding when
the physical layer or link layer state of the
corresponding interface is down.
The DHCP lease duration expires and the
bound interface dynamically obtains a new
IP address from the DHCP server
The SIP registrar is enabled.

Configuring server information management

1.
Select Voice Management > Call Connection > SIP Server Group Management from the navigation
tree.
Description
If you select IPv4 Address Binding as the media stream binding mode, you must
type the IPv4 address to be bound in this field.
If you select Interface Binding as the media stream binding mode, you need to
specify the interface to be bound from the list. Only the Layer 3 Ethernet interface,
GE interface, and dialer interface are supported.
Configure source address binding mode for signaling streams.
None—Disable source address binding.
IPv4 Address Binding—Specify a static IPv4 address as the source address.
Interface Binding—Specify the IP address of an interface as the source address.
If you select IPv4 Address Binding as the signaling stream binding mode, you must
enter the IPv4 address to be bound in this field.
If you select Interface Binding as the signaling stream binding mode, you must
specify the interface to be bound from the list. Only Layer 3 Ethernet interfaces, GE
interfaces, and dialer interfaces are supported.
Result
A new source address binding for media does not take effect
for ongoing SIP media sessions but takes effect for
subsequent SIP media sessions.
A new source address binding for signal takes effect
immediately for all SIP signaling sessions.
The source IP address binding becomes invalid and will not work
until the interface is up. During the shutdown period, the
gateway automatically gets a source IP address for sent
signaling or media flows.
The source IP address binding is removed.
The source IP address binding is cancelled, and restored when
the interface is connected.
The source address binding does not take effect and the
gateway automatically gets a source IP address for packets.
The new IP address will be used as the source IP address.
The subsequent registration update messages use the source IP
address newly bound for signaling streams to initiate
registration.
660

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents