Creating A Vlan And Its Vlan Interface - HP MSR SERIES Configuration Manual

Hide thumbs Also See for MSR SERIES:

Table of Contents

Configuring parameters for a VLAN

Creating a VLAN and its VLAN interface

Select Interface Setup > LAN Interface Setup from the navigation tree. The system goes to the default

page, VLAN Setup page.

Figure 36 VLAN setup page

Table 35 Configuration items

VLAN Create And Remove

Create VLAN Interface

Configure an IP address and MAC address for a VLAN

interface. Select whether to enable the DHCP server function for

a VLAN interface. If yes, configure the related parameters.

You can also configure the DHCP server function in Advanced >

DHCP Setup. For more information, see "Configuring DHCP." This

chapter only describes the DHCP server configuration in the LAN

Setup module.

Set the operation type to Create or Remove.

Enter the ID of the VLAN (or VLAN interface) to be created or removed. You can

create or remove multiple VLANs at a time.

Create a VLAN interface when you create a VLAN.

Show Quick Links

Table of Contents