Backing Up And Restoring Device Files Through The Usb Port - HP MSR SERIES Configuration Manual

3. Click one of the Browse... buttons:
When you click the upper Browse... button in this figure, the file upload dialog box appears.
You can select a .cfg file to upload.
When you click the lower Browse... button in this figure, the file upload dialog box appears.
You can select an .xml file to upload.
4. Click Apply.

Backing up and restoring device files through the USB port

The files needed in device running, such as startup files and configuration files, are stored in the storage
medium of the device. To facilitate management of the files on the device, the device provides the fast
backup and restoration function.
Fast backup—Backs up files on the device to the destination device through a universal serial bus
•
(USB) port.
Fast restoration—Transfers files from the device where the files are backed up to the local device
•
through a USB port. In addition, the system allows you to choose whether to specify the startup file
or configuration file to be restored as the main startup file or configuration file of the device.
The storage medium of a device has many types, such as flash cards and CF cards. The storage medium
type used by the device depends on the device model.
To backup and restore device files through the USB port:
1. From the navigation tree, select System Management > Configuration.
2. Click Backup and Restore.
The backup and restoration page appears.
477