STW34, STW37, STW40, WSM
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to See "5. TIGHTENING TORQUES" on page G-10.)
Steering wheel mounting nut
Delivery hose R.H. retaining nut
Delivery hose L.H. retaining nut
Delivery hose retaining nut
Delivery hose joint screw
Bi-speed delivery pipe joint screw
Bi-speed delivery pipe retaining nut
Engine mounting screw and nut (M10)
Engine mounting nut (M12)
Front axle frame mounting screw (M12)
Clutch mounting screw
Muffler mounting screw
Rear wheel mounting screw and nut
Hydraulic hose PB, P and T retaining nut
Outer roof mounting screw
Cabin mounting bolt and nut
Item
N·m
48.1 to 55.9
24.5 to 29.4
24.5 to 29.4
34.3 to 44.1
45.1 to 53.0
30 to 40
29 to 49
48.1 to 55.9
77.5 to 90.2
78 to 90
23.5 to 27.5
32 to 37
196.1 to 225.6
30 to 40
3.5 to 4.0
124 to 147
1-S10
kgf·m
lbf·ft
4.9 to 5.7
35.4 to 41.2
2.5 to 3.0
18.1 to 21.7
2.5 to 3.0
18.1 to 21.7
3.5 to 4.5
25.3 to 32.5
4.60 to 5.40
33.3 to 39.0
3.1 to 4.0
23 to 29
3.0 to 5.0
21.7 to 36.2
4.9 to 5.7
35.5 to 41.2
7.9 to 9.2
57.2 to 66.5
7.9 to 9.2
58 to 66
2.4 to 2.8
17.4 to 20.2
3.2 to 3.8
24 to 27
20.0 to 23.0
145 to 166
3.1 to 4.0
23 to 29
0.36 to 0.40
2.6 to 2.9
12.6 to15.0
91.1 to 108
KiSC issued 11, 2014 A
ENGINE