STW34, STW37, STW40, WSM
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to "5. TIGHTENING TORQUES" on page G-10.)
Steering wheel mounting nut
Delivery hose R.H. retaining nut
Delivery hose L.H. retaining nut
Return hose retaining nut
Delivery hose joint screw
Bi-speed delivery pipe joint screw (pump side)
Bi-speed delivery pipe retaining nut
(Bi-speed valve side)
Engine mounting screw and nut (M10)
Engine mounting nut (M12)
Rear wheel mounting screw and nut
Hydraulic hose PB, P and T retaining nuts
Outer roof mounting screw
Cabin mounting bolt and nut
Clutch mounting screw
Item
N·m
48.1 to 55.9
24.5 to 29.4
24.5 to 29.4
34.3 to 44.1
45.1 to 53.0
34.3 to 39.2
29 to 49
48.1 to 55.9
77.5 to 90.2
196.1 to 225.6
30 to 40
3.5 to 4.0
124 to 147
23.5 to 27.5
2-S3
kgf·m
lbf·ft
4.9 to 5.7
35.4 to 41.2
2.5 to 3.0
18.1 to 21.7
2.5 to 3.0
18.1 to 21.7
3.5 to 4.5
25.3 to 32.5
4.60 to 5.40
33.3 to 39.0
3.5 to 4.0
25.3 to 28.9
3.0 to 5.0
21.7 to 36.2
4.9 to 5.7
35.5 to 41.2
7.9 to 9.2
57.2 to 66.5
20.0 to 23.0
145 to 166
3.1 to 4.0
23 to 29
0.36 to 0.40
2.6 to 2.9
12.6 to 15.0
91.1 to 108
2.4 to 2.8
17.4 to 20.2
9Y1211109CLS0003US0
KiSC issued 11, 2014 A
CLUTCH