STW34, STW37, STW40, WSM
Wiring Harness (Right Side)
1. Disconnect the connector from the flasher unit (1).
2. Remove the air cleaner (2).
3. Disconnect the glow plug cable (3).
4. Disconnect the 1P connector (4) from the coolant temperature
sensor.
5. Disconnect the connector form the front wheel angle sensor (5).
6. Disconnect the connector from the key stop solenoid (6).
7. Disconnect the connector from the engine revolution sensor (7).
(1) Flasher Unit
(2) Air Cleaner
(3) Glow Plug Cable
(4) 1P Connector
2-S11
CLUTCH
(5) Front Wheel Angle Sensor
(6) Key Stop Solenoid
(7) Engine Revolution Sensor
9Y1211109ENS0027US0
KiSC issued 11, 2014 A