Disassembling And Assembling - wsm STW37 Workshop Manual

STW34, STW37, STW40, WSM

[2] DISASSEMBLING AND ASSEMBLING

(1) Steering Controller
Hood, Side Cover and Battery Cord
1. To open the hood (1), hold the hood (1) and pull the release
lever (3) and open the hood (1).
2. Remove the bolt from each of the side covers and remove the
side covers (2).
3. Disconnect the battery negative cable (4).
4. Disconnect the head light connector (5) and damper (7).
5. Remove the two screws (6), and then remove the hood (1).
(When reassembling)
NOTE
• When disconnecting the battery cords, disconnect the
grounding cord first. When connecting, positive cord first.
(1) Hood
(2) Side Cover
(3) Release Lever
(4) Battery Negative Cable
Steering Wheel and Panel Under Cover
1. Remove the covers (3).
2. Remove the steering wheel cap.
3. Remove the steering wheel mounting nut (1) and remove the
steering wheel (2) with a steering wheel puller (Code No.
07916-51090).
4. Remove the panel cover (4).
(When reassembling)
Steering wheel mounting
Tightening torque
nut
(1) Nut
(2) Steering Wheel
7-S6
STEERING
(5) Head Light Connector
(6) Screw
(7) Damper
9Y1211109ENS0021US0
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 lbf·ft
(3) Cover
(4) Panel Cover
9Y1211109ENS0022US0
KiSC issued 11, 2014 A