wsm STW37 Workshop Manual page 234

STW34, STW37, STW40, WSM
Fuel Tank
1. Pull out the clamps (1), (4).
2. Disconnect the overflow hoses from fuel tank (3).
3. Remove the screws (5), (6) and then remove the fuel tank (3)
with pillar (2).
(1) Clamp
(2) Pillar
(3) Fuel Tank
Hydraulic Pipe and Hose
1. Disconnect the accelerator wire (3) from the engine.
2. Remove the retaining screws (7) and separate the 3P hydraulic
delivery pipe (6) from the hydraulic pump.
3. Disconnect the bi-speed delivery pipe (2) from the hydraulic
pump.
4. Disconnect the oil cooler inlet hose (9) and outlet hose (8).
5. Remove the retaining screws (5), (10) and then disconnect the
oil cooler pipe (4).
6. Disconnect the suction hose (1).
Bi-speed delivery pipe joint
screw (Pump side)
Tightening torque
Bi-speed delivery pipe
retaining nut
(Bi-speed valve side)
(1) Suction Hose
(2) Bi-speed Delivery Pipe
(3) Accelerator Wire
(4) Oil Cooler Pipe
(5) Retaining Screw
3-S20
TRANSMISSION
(4) Clamp
(5) Screw
(6) Screw
9Y1211109ENS0029US0
30 to 40 N·m
3.1 to 4.0 kgf·m
23 to 29 lbf·ft
29 to 49 N·m
3.0 to 5.0 kgf·m
21.7 to 36.2 lbf·ft
(6) 3P Hydraulic Delivery Pipe
(7) Retaining Screw
(8) Oil Cooler Outlet Hose
(9) Oil Cooler Inlet Hose
(10) Retaining Screw
9Y1211109ENS0031US0
KiSC issued 11, 2014 A