Hydraulic Block Type Outlet - wsm STW37 Workshop Manual

STW34, STW37, STW40, WSM

7. HYDRAULIC BLOCK TYPE OUTLET

The hydraulic block type outlet is located at the right
hand side of the clutch housing.
This hydraulic block type outlet is provided to take
power out from the tractor to operate the hydraulic
cylinders on the implement, such as front end loader,
front blade and so on.
NOTE
• For hydraulic block type outlet, be sure to use
the control valve of the "Power beyond type"
with relief valve that has a third line return to tank
for the operation of hydraulic block.
• The tank port flow from implement should be
connected to the tank port (5) located on the
right hand side of mid case.
(1) Block Cover
(2) Hydraulic Block
(3) Inlet
(4) Outlet
(5) Tank Port
(6) Brake Rod (R.H.)
8-M17
HYDRAULIC SYSTEM
A: From Hydraulic Pump
B: To Implement (Outlet)
Max. flow 30.6 L/min.
(8.08 U.S.gal./min.,
6.73 Imp.gal./min.)
No relief valve in the
hydraulic block.
C: From Implement (Inlet)
[1] When implement is not
attached
[2] When implement is
attached
9Y1211109HYM0016US0
KiSC issued 11, 2014 A