wsm STW37 Workshop Manual page 272

STW34, STW37, STW40, WSM
Hydraulic PTO Clutch
1. Remove the bearing (1) and 17T gear (2).
2. Pull out the counter shaft (13), collar (11), bearing (12), 21T
gear (10), needle bearing (9) and collar (8).
3. Remove the external snap ring (3) and pull put the collar (4) and
stopper (5).
4. Remove the internal snap ring (14) and remove the pressure
plate (15) steel plate and clutch disc (16).
5. Remove the external snap ring (17) with clutch pack
disassembling tool, and remove the collar (19) and spring (18).
(When reassembling)
• Apply transmission oil to the needle bearing (9).
(1) Bearing
(2) 17T Gear
(3) External Snap Ring
(4) Collar
(5) Stopper (with Needle Bearing)
(6) Clutch Body
(7) O-rings
(8) Collar
(9) Needle Bearing
(10) 21T Gear
3-S58
TRANSMISSION
(11) Collar
(12) Bearing
(13) Counter Shaft
(14) Internal Snap Ring
(15) Pressure Plate
(16) Steel Plate and Clutch Disc
(17) External Snap Ring
(18) Spring
(19) Collar
(To be continued)
KiSC issued 11, 2014 A