Separating Mid Case - wsm STW37 Workshop Manual

STW34, STW37, STW40, WSM

(5) Separating Mid Case

Separating Mid Case
1. Remove the transmission oil filter bracket (4) with suction pipe
(3).
2. Remove the counter shaft and coupling (2).
3. Remove the mid case mounting screws and nuts to separate
the mid case (1) from the transmission case.
(When reassembling)
• Apply liquid gasket (Three Bond 1206C or equivalent) to the
joint face of the mid case and transmission case.
Mid case mounting screw
Tightening torque
and nut
(1) Mid Case
(2) Counter Shaft and Coupling
3-S48
TRANSMISSION
39.3 to 44.1 N·m
4.0 to 4.5 kgf·m
29.0 to 32.5 lbf·ft
(3) Suction Pipe
(4) Oil Filter Bracket
9Y1211109TRS0036US0
KiSC issued 11, 2014 A