wsm STW37 Workshop Manual page 177

STW34, STW37, STW40, WSM
Hood, Side Cover and Battery Cord
1. To open the hood (1), hold the hood (1) and pull the release
lever (3) and open the hood (1).
2. Remove the bolt from each of the side covers (2) and remove
the side covers (2).
3. Disconnect the battery negative cable (4).
4. Disconnect the head light connector (5) and damper (7).
5. Remove the two screws (6) and then remove the hood (1).
(When reassembling)
NOTE
• When disconnecting the battery cords, disconnect the
grounding cord first. When connecting, positive cord first.
(1) Hood
(2) Side Cover
(3) Release Lever
(4) Battery Negative Cable
Wiring Harness
1. Remove the slow blow fuses (7), (9).
2. Disconnect the battery positive cable (8) from the battery (10).
3. Remove the fuse box (1).
4. Disconnect the relays (2), (3).
5. Remove the electrical outlet relay (4).
6. Remove the key stop relay (5).
7. Disconnect the pressure switch (6).
8. Remove the battery (10).
(1) Fuse Box
(2) Head Light Relay
(3) Flasher Relay
(4) Electrical Outlet Relay
(5) Key Stop Relay
Steering Wheel
1. Remove the covers (3).
2. Remove the steering wheel cap.
3. Remove the steering wheel mounting nut (1) and remove the
steering wheel (2) with a steering wheel puller (Code No.
07916-51090).
(When reassembling)
Steering wheel mounting
Tightening torque
nut
(1) Steering Wheel Mounting Nut
(2) Steering Wheel
2-S16
CLUTCH
(5) Head Light Connector
(6) Screw
(7) Damper
9Y1211109ENS0038US0
(6) Pressure Switch
(7) Slow Blow Fuse For Defogger
(8) Battery Positive Cable
(9) Slow Blow Fuse
(10) Battery
9Y1211109ENS0132US0
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 lbf·ft
(3) Cover
9Y1211109ENS0039US0
KiSC issued 11, 2014 A