wsm STW37 Workshop Manual page 307

STW34, STW37, STW40, WSM
Rear Axle
1. Remove the setting screw and pull out the lower link pin.
2. Place the disassembling stand under the rear axle case.
3. Remove the rear axle mounting screws and nuts, and separate
the rear axle (1).
(When reassembling)
• Apply liquid gasket (Three Bond 1206C or equivalent) to the
joint face of the rear axle case (1) and transmission case.
• Fix the brake plate (2) to the rear axle case (1) with the liquid
gasket.
Tightening torque Brake case mounting screw
(1) Rear Axle
4-S14
REAR AXLE
39.3 to 44.1 N·m
4.0 to 4.5 kgf·m
29.0 to 32.5 lbf·ft
(2) Brake Plate
9Y1211109RAS0013US0
KiSC issued 11, 2014 A