wsm STW37 Workshop Manual page 118

STW34, STW37, STW40, WSM
Wiring Harness (Right Side)
1. Remove the loader lever guide mounting screws (1).
2. Open the loader lever guide (2) and then disconnect the
connectors for PTO switch (4) and beacon switch (3).
(1) Loader Lever Guide Mounting
Screw
(2) Loader Lever Guide
WIring Harness
1. Pull down the grommet (1) for seat switch connector.
2. Remove the clamp (2).
(1) Grommet
1-S39
ENGINE
(3) Beacon Switch
(4) PTO Switch
9Y1211109ENS0049US0
(2) Clamp
9Y1211109ENS0050US0
KiSC issued 11, 2014 A