wsm STW37 Workshop Manual page 251

STW34, STW37, STW40, WSM
Fender Assembly
1. Remove the fender cover (1).
2. Remove the sponges (4), (5).
(When reassembling)
• Assemble the sponge (center) (4) between the cruise control
lever (2) and range gear shift lever (6).
(1) Fender Cover
(2) Cruise Control Lever
(3) Sponge (Inner)
Release Wire and Wiring Harness (Left Side)
1. Remove the fender under cover (1).
2. Remove the release wire (3).
3. Remove the lever guide mounting screws (2), and then open the
lever guide (4).
4. Disconnect the wiring connectors for the bi-speed controller
connectors (5) and electrical outlet connector (6).
5. Remove the lever guide (4) with bi-speed controller.
(1) Fender Under Cover
(2) Lever Guide Mounting Screw
(3) Release Wire (Cruise Control)
3-S37
TRANSMISSION
(4) Sponge (Center)
(5) Sponge (Outer)
(6) Range Gear Shift Lever
9Y1211109ENS0046US0
(4) Lever Guide
(5) Bi-speed Controller Connector
(6) Electrical Outlet Connector
9Y1211109ENS0047US0
KiSC issued 11, 2014 A