wsm STW37 Workshop Manual page 338

STW34, STW37, STW40, WSM
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to "5. TIGHTENING TORQUES" on page G-10.)
Tie-rod lock nut
Adjusting screw lock nut
Front wheel mounting screws and nuts
Delivery hose retaining nut
Front axle brackets mounting bolt
Tie-rod end nut (Power steering cylinder)
Steering cylinder mounting reamer screw
Bevel gear case mounting screws
Gear case cover mounting screws
7T pinion shaft UBS screw
Differential case cover mounting screws
Item N·m
117 to 137
39.2 to 45.1
77.5 to 90.2
25 to 30
124 to 147
34.3 to 44.1
48.1 to 55.9
77.5 to 90.2
48.1 to 55.9
60.8 to 70.6
29.4 to 34.3
6-S3
FRONT AXLE
kgf·m lbf·ft
12 to 14 86.8 to 101.3
4.0 to 4.6 28.9 to 33.3
7.9 to 9.2 57.1 to 66.5
2.5 to 3.0 18.1 to 21.7
12.6 to 15.0 91.2 to 108
3.5 to 4.5 25.3 to 32.5
4.9 to 5.7 35.4 to 41.2
7.9 to 9.2 57.1 to 66.5
4.9 to 5.7 35.4 to 41.2
6.2 to 7.2 44.8 to 52.1
3.0 to 3.5 21.7 to 25.3
9Y1211109FAS0003US0
KiSC issued 11, 2014 A