wsm STW37 Workshop Manual page 321

STW34, STW37, STW40, WSM
Fender (Left Side)
1. Remove the fender covers (6) and the sponges (8), (9).
2. Remove the differential lock pedal (4) with the spring (5).
3. Remove the screws (3).
4. Remove the fender mounting screw (1).
5. Disconnect the clamp (2).
(When reassembling)
• Assemble the sponge (center) (8) between the cruise control
lever (11) and range gear shift lever (10).
Tightening torque Fender mounting screw (1)
(1) Fender Mounting Screw
(2) Clamp
(3) Screw
(4) Differential Lock Pedal
(5) Spring
(6) Fender Cover
Lever Guide and Bi-speed Controller Connector
1. Remove the lever guide mounting screws (1).
2. Open the lever guide (3).
3. Disconnect the bi-speed controller connectors (2) and then
remove the lever guide (3).
(1) Screw
(2) Bi-speed Controller Connector
5-S7
BRAKES
197 to 225 N·m
20.0 to 23.0 kgf·m
145 to 166 psi
(7) Sponge (Inner)
(8) Sponge (Center)
(9) Sponge (Outer)
(10) Range Gear Shift Lever
(11) Cruise Control Lever
9Y1211109TRS0020US0
(3) Lever Guide
9Y1211109TRS0021US0
KiSC issued 11, 2014 A