wsm STW37 Workshop Manual page 41

STW34, STW37, STW40, WSM
Checking Operator Presence Control
WARNING
To avoid personal injury or death:
• Do not allow anyone near the tractor while testing.
• If the tractor does not pass the test, do not operate the
tractor.
 Test: Switch for the operator's seat.
1. Sit on the operator's seat.
2. Start the engine.
3. Engage the mid-PTO gear shift lever.
4. Stand up. (Do not get off the machine.)
 Test: Switch for the operator's seat.
1. Sit on the operator's seat.
2. Start the engine.
3. Engage the mid-PTO gear shift lever.
4. Stand up. (Do not get off the machine.)
5. The engine must shut off after approximately 1 second.
 Test: Switch for the parking brake lever.
1. Sit on the operator's seat.
2. Start the engine.
3. Engage the rear PTO gear shift lever, and disengage the
mid-PTO gear shift lever.
4. Release the parking brake.
5. Stand up. (Do not get off the machine.)
6. The engine must shut off after approximately 1 second.
 Test: Switch for the operator's seat
1. Sit on the operator's seat.
2. Start engine.
3. Engage the mid-PTO gear shift lever.
4. Stand up. (Do not get off the machine.)
5. The engine must shut off after approximately 1 second.
 Test: Switch for the parking brake lever
1. Sit on the operator's seat.
2. Start engine.
3. Engage the rear PTO gear shift lever, and disengage the
mid-PTO gear shift lever.
4. Release the parking brake.
5. Stand up. (Do not get off the machine.)
6. The engine must shut off after approximately 1 second.
(1) Speed Control Pedal
(2) Clutch Pedal
(3) PTO Clutch Control Switch
G-22
GENERAL
(4) Rear PTO Gear Shift Lever
(5) Parking Brake Lever
(6) Mid-PTO Gear Shift Lever
9Y1211109GEG0013US0
KiSC issued 11, 2014 A