wsm STW37 Workshop Manual page 331

STW34, STW37, STW40, WSM
Clearance between Brake Pedal Shaft and Brake Pedal
1. Measure the brake pedal shaft O.D. (bearing surface) with an
outside micrometer.
2. Measure the brake pedal I.D. with a cylinder gauge.
3. Calculate the clearance.
4. If the clearance exceeds the allowable limit, replace them.
Factory specification
Clearance between
brake pedal shaft and
brake pedal
Allowable limit
Brake pedal shaft O.D. Factory specification
Brake pedal I.D. Factory specification
5-S17
BRAKES
0.000 to 0.136 mm
0.0000 to 0.0054 in.
0.5 mm
0.020 in.
24.916 to 25.000 mm
0.9809 to 0.9843 in.
25.000 to 25.052 mm
0.9843 to 0.9863 in.
9Y1211109BRS0009US0
KiSC issued 11, 2014 A