wsm STW37 Workshop Manual page 58

STW34, STW37, STW40, WSM
Replacing Slow-Blow Fuses
The slow-blow fuses are intended to protect the electrical
cabling. If any of them has blown out, be sure to pinpoint the cause.
Never use any substitute, use only a KUBOTA genuine part.
[ROPS model]
FUSE No. Capacity (A)
(1) 40
(2) 40
(3) 40
(4) 50
[CAB model]
FUSE No. Capacity (A)
(1) 40
(2) 40
(3) 30
(4) 40
(5) 50
Replacing Light
1. Head lights and rear combination lights.
Take the bulb out of the light body and replace with a new one.
2. Other light:
Detach the lens and replace the bulb.
Light
Head lights
Tail light
Brake stop light
Turn signal / Hazard light
Front position light
Dome light
Work light (if equipped)
Number plate light
Lubricating Points [CAB Model]
(1) Door Hinge
G-39
GENERAL
Protected circuit
Glow
Key stop
Main switch
Main
Protected circuit
Glow
Key stop
Electrical outlet
Main switch
Main
9Y1211109GEG0043US0
Capacity
45 W /40 W
5 W
21 W
21 W
5 W
5 W
35 W
10 W
9Y1211109GEG0044US0
(2) Rear Window Hinge
9Y1211109GEG0046US0
KiSC issued 11, 2014 A