Servicing Specifications - wsm STW37 Workshop Manual

STW34, STW37, STW40, WSM

2. SERVICING SPECIFICATIONS

Starter
• Commutator
• Mica
• Brush
• Brush Holder and Holder Support
Glow Plug
Stop Solenoid
• Pull-in Coil
• Holding Coil
Fuel Level Sensor
• Float at Upper-most Position
• Float at Lower-most Position
Coolant Temperature Sensor
• at 120 °C (266 °F)
• at 100 °C (221 °F)
• at 80 °C (176 °F)
• at 50 °C (122 °F)
Alternator
• Stator
• Rotor
• Slip Ring
• Brush
Item
O.D.
Under Cut
Length
Resistance
Resistance
Resistance
Resistance
Resistance
Resistance
Resistance
Resistance
Resistance
Resistance
No-load voltage
Resistance
Resistance
O.D.
Length
9-S9
ELECTRICAL SYSTEM
Factory Specification
30.0 mm
1.181 in.
0.50 to 0.80 mm
0.0197 to 0.0315 in.
15.0 mm
0.591 in.
Infinity
Approx. 0.9 Ω
Approx. 0.375 Ω
Approx. 15.6 Ω
1.0 to 5.0 Ω
103 to 117 Ω
Approx. 16.1 Ω
Approx. 27.4 Ω
Approx. 51.9 Ω
Approx. 153.9 Ω
More than
14 V
Less than
1.0 Ω
2.9 Ω
14.4 mm
0.567 in.
10.5 mm
0.413 in.
Allowable Limit
29.0 mm
1.142 in.
0.20 mm
0.0079 in.
11.0 mm
0.433 in.
–
–
–
–
–
–
–
–
–
–
–
–
–
12.8 mm
0.504 in.
8.4 mm
0.331 in.
9Y1211109ELS0002US0
KiSC issued 11, 2014 A