STW34, STW37, STW40, WSM
(1) Front Wheels
Front wheel tread can not be adjusted.
IMPORTANT
• Do not turn front discs to obtain wider tread.
• When re-fitting or adjusting a wheel, tighten the bolts to the following torques then recheck after driving
the tractor 200 m (219 yards) and 10 times of shuttle movement by 5 m (5 yards), and thereafter according
to service interval.
• Do not turn front discs to obtain wider tread. In setting up the front wheels, make sure that the inflation
valve stem of the tires face outward.
(2) Rear Wheels
Rear tread width can be adjusted as shown with the standard equipped tires.
To change the tread width
1. Remove the wheel rim and / or disk mounting bolts.
2. Change the position of the rim and / or disk (right and left) to the desired position, and tighten the bolts.
IMPORTANT
• Always attach wheels as shown in the drawing.
• If not attached as illustrated, transmission parts may be damaged.
• When re-fitting or adjusting a wheel, tighten the bolts to the following torques then recheck after driving
the tractor 200 m (219 yards) and 10 times of shuttle movement by 5 m (5 yards), and thereafter according
to service interval.
• To attach 13.6-16 rear tires, need to use rear tire spacer.
Tires
Tread
(1) 950 mm (37.40 in.)
Models
Tires
6.00-12 Farm
Tread
1020 mm (40.16 in.)
9.5-22 Farm
(2) 1070 mm (42.13 in.)
STW34, STW37, STW40
24 × 8.50-14 Turf
1020 mm (40.16 in.)
13.6-16 Turf
(3) 990 mm (39.0 in.)
G-52
GENERAL
9Y1211109GEG0066US0
(4) 1055 mm (41.54 in.)
9Y1211109GEG0067US0
KiSC issued 11, 2014 A