wsm STW37 Workshop Manual page 222

STW34, STW37, STW40, WSM
Differential case to Differential Side Gear
• Differential Case Ring Gear
• Differential Side Gear Boss
Differential Pinion to Differential Pinion
Shaft
• Differential Pinion
• Differential Pinion Shaft
Hypoid pinion
Hypoid pinion to Hypoid Ring Gear
Mid PTO Drive Shaft to 15T Gear
• 15T Gear
• Mid PTO Drive Shaft
Item
Clearance
I.D.
O.D.
Clearance
I.D.
O.D.
Motive Force
Motive Torque
Backlash
Tooth Contact
Center of Tooth
Contact
Clearance
I.D.
O.D.
3-S8
Factory Specification
0.05 to 0.10 mm
0.0020 to 0.0039 in.
32.000 to 32.025 mm
1.25984 to 1.26083 in.
31.925 to 31.950 mm
1.25689 to 1.25787 in.
0.048 to 0.084 mm
0.00189 to 0.00331 in.
18.032 to 18.050 mm
0.70992 to 0.71063 in.
17.966 to 17.984 mm
0.70732 to 0.70803 in.
10.8 to 16.7 N
1.1 to 1.7 kgf
2.43 to 3.75 lbf
0.520 to 0.559 N·m
0.053 to 0.057 kgf·m
0.383 to 0.412 lbf·ft
0.1 to 0.3 mm
0.004 to 0.01 in.
–
–
0.040 to 0.074 mm
0.0016 to 0.0029 in.
22.520 to 22.541 mm
0.8866 to 0.8874 in.
22.467 to 22.480 mm
0.8845 to 0.8850 in.
TRANSMISSION
Allowable Limit
0.4 mm
0.016 in.
–
–
0.2 mm
0.008 in.
–
–
–
–
–
More than
25 %
3/10 to 4/10 of the
entire width from
the small end
0.1 mm
0.0039 in.
–
–
9Y1211109TRS0004US0
KiSC issued 11, 2014 A