wsm STW37 Workshop Manual page 171

STW34, STW37, STW40, WSM
Wiring Harness (Left Side)
1. Remove the fuse box (1) from the stay.
2. Disconnect the connectors from the relays (2).
3. Remove the glow relay (3).
4. Remove the key stop relay (4).
5. Remove the slow blow fuse boxes (6).
6. Disconnect the battery positive cable (5) from the battery
terminal.
7. Remove the battery (7).
8. Disconnect the connectors from the alternator (8), oil switch (9)
and stater (10).
9. Disconnect the grounding terminal (11).
(1) Fuse Box
(2) Relay
(3) Glow Relay
(4) Key Stop Relay
(5) Battery Positive Cable
2-S10
CLUTCH
(6) Slow Blow Fuse
(7) Battery
(8) Alternator
(9) Oil Switch
(10) Starter
(11) Grounding Terminal
9Y1211109ENS0026US0
KiSC issued 11, 2014 A