wsm STW37 Workshop Manual page 536

STW34, STW37, STW40, WSM
Seat and Lever Grip
1. Disconnect the seat switch connector (7) and remove the seat
(4).
2. Remove the grips of the rear PTO shift lever (2), position control
lever (1), cruise control lever (5) and range gear shift lever (6).
3. Remove the remote control lever guide (3).
(When reassembling)
• Do not confuse the grips.
– Grip (yellow) for the rear PTO shift lever (2).
– Grip (red) for the range gear shift lever (6).
(1) Position Control Lever Grip
(2) Rear PTO Shift Lever Grip
(3) Remote Control Lever Guide
(4) Seat
10-S37
(5) Cruise Control Lever Grip
(6) Range Gear Shift Lever Grip
(7) Seat Switch Connector
9Y1211109ENS0044US0
KiSC issued 11, 2014 A
CABIN