wsm STW37 Workshop Manual page 168

STW34, STW37, STW40, WSM
Steering Wheel and Panel Under Cover
1. Remove the covers (3).
2. Remove the steering wheel cap.
3. Remove the steering wheel mounting nut (1) and remove the
steering wheel (2) with a steering wheel puller (Code No.
07916-51090).
4. Remove the panel cover (4).
(When reassembling)
Steering wheel mounting
Tightening torque
nut
(1) Nut
(2) Steering Wheel
Instrument Panel
1. Remove the instrument panel mounting screws and disconnect
the instrument panel connector (2). Then remove the instrument
panel (1).
2. Disconnect the combination switch connector (6), main switch
connector (3) and hazard switch connector (4).
3. Remove the under cover (5).
(1) Instrument Panel
(2) Instrument Panel Connector
(3) Main Switch Connector
2-S7
CLUTCH
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 lbf·ft
(3) Cover
(4) Panel Cover
9Y1211109ENS0022US0
(4) Hazard Switch Connector
(5) Under Cover
(6) Combination Switch Connector
9Y1211109ENS0023US0
KiSC issued 11, 2014 A