wsm STW37 Workshop Manual page 465

STW34, STW37, STW40, WSM
Grow Relay (For ROPS)
1. Turn the main switch off and remove the glow relay (1).
2. Apply battery voltage across 3 and 4 terminals, and check for
continuity across 1 and 2 terminals.
3. If continuity is not established across 1 and 2 terminals, renew
the glow relay.
NOTE
• The glow relay and the key stop relay are the same parts.
Resistance Terminal 1 – Terminal 2
(1) Glow Relay
Electrical Outlet Relay (For Cabin)
1. Turn the main switch off and remove the electrical outlet relay
(1).
2. Apply battery voltage across 3 and 4 terminals, and check for
continuity across 1 and 2 terminals.
3. If continuity is not established across 1 and 2 terminals, renew
the glow relay.
NOTE
• The electrical outlet relay and the key stop relay are the
same parts.
Resistance Terminal 1 – Terminal 2
(1) Electrical Outlet Relay
9-S28
ELECTRICAL SYSTEM
0 Ω
9Y1211109ELS0042US0
0 Ω
9Y1211109ELS0043US0
KiSC issued 11, 2014 A