wsm STW37 Workshop Manual page 302

STW34, STW37, STW40, WSM
3-Point Linkage and ROPS Under Frame
1. Remove the lifting rods (3).
2. Remove the lower links (5) with the check chains (6).
3. Remove the PTO shaft cover (4).
4. Remove the joint stay (1).
5. Remove the ROPS under frame (2).
6. Remove the grounding cable (7).
(When reassembling)
Joint stay mounting screw
(M12) (1)
Tightening torque
Rear frame mounting screw
(M12) (2)
(1) Joint Stay
(2) ROPS Under Frame
(3) Lifting Rod
(4) PTO Shaft Cover
Brake Linkage
1. Remove the brake rod (4) and parking brake rod (2).
2. Remove external snap ring and remove the brake lever (3).
3. Remove the cruise control rod (5).
4. Remove the range gear shift rod (6).
5. Remove the plate (7).
6. Remove the range gear shift lever (8) and cruise control lever
(1).
(When reassembling)
• When reassembling the brake lever (3), align the punch mark
(9) of the brake lever (3).
(1) Cruise Control Lever
(2) Parking Brake Rod
(3) Brake Lever
(4) Brake Rod
(5) Cruise Control Rod
(6) Range Gear Shift Rod
4-S9
REAR AXLE
103.0 to 117.7 N·m
10.51 to 12.00 kgf·m
75.97 to 86.81 lbf·ft
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 lbf·ft
(5) Lower Link
(6) Check Chain
(7) Grounding Cable
9Y1211109RAS0006US0
(7) Plate
(8) Range Gear Shift Lever
(9) Punch Mark
[A] Left Side
[B] Right Side
9Y1211109RAS0007US0
KiSC issued 11, 2014 A