wsm STW37 Workshop Manual page 242

STW34, STW37, STW40, WSM
Rear Frame and Under Frame
1. Remove the rubber mount screws (9) and rear frame mounting
screws (5) then remove the rear frame (4).
2. Remove the rear cross bar (2).
3. Remove the rubber mount screw (8) and remove the rear
bracket (6), (7).
4. Remove the under frame (1), (3).
(When reassembling)
• Apply liquid lock (Three Bond 1372D or equivalent) to the rear
frame mounting screw (M12) (10).
Rear cross bar mounting
screw
Rubber mount screw (8),
Tightening torque
(9)
Rear frame mounting screw
(M12) (10)
3-S28
TRANSMISSION
103 to 117 N·m
10.5 to 12.0 kgf·m
76.0 to 86.7 lbf·ft
196.0 to 225.0 N·m
20.0 to 23.0 kgf·m
144.7 to 166.4 lbf·ft
63 to 72 N·m
6.4 to 7.4 kgf·m
47 to 53 lbf·ft
(1) Under Frame R.H.
(2) Rear Cross Bar
(3) Under Frame L.H.
(4) Rear Frame
(5) Rear Frame Mounting Screw
(6) Rear Bracket R.H.
(7) Rear Bracket L.H.
(8) Rubber Mount Screw
(9) Rubber Mount Screw
(10) Flange Bolt
9Y1211109TRS0028US0
KiSC issued 11, 2014 A