wsm STW37 Workshop Manual page 102

STW34, STW37, STW40, WSM
Rubber and Wiring Harness
1. Remove the fuel tank cover (1)
2. Disconnect the OPC controller connector (4).
3. Remove the steering controller cover (3).
4. Remove the sponge (2).
5. Turn over the fuel sensor cover (5), and disconnect the
grounding wire (8) and 1P connector (6) from the fuel level
sensor (7).
(1) Fuel Tank Cover
(2) Sponge
(3) Steering Controller Cover
(4) OPC Controller Connector
1-S23
ENGINE
(5) Fuel Sensor Cover
(6) 1P Connector
(7) Fuel Sensor
(8) Grounding Wire
9Y1211109ENS0024US0
KiSC issued 11, 2014 A