wsm STW37 Workshop Manual page 366

STW34, STW37, STW40, WSM
Instrument Panel
1. Remove the instrument panel mounting screws and disconnect
the instrument panel connector (2). Then remove the instrument
panel (1).
2. Disconnect the combination switch connector (6), main switch
connector (3) and hazard switch connector (4).
3. Remove the under cover (5).
(1) Instrument Panel
(2) Instrument Panel Connector
(3) Main Switch Connector
Rubber and Wiring Harness
1. Remove the fuel tank cover (1)
2. Disconnect the OPC controller connector (4).
3. Remove the steering controller cover (3).
4. Remove the sponge (2).
5. Turn over the fuel sensor cover (5), and disconnect the
grounding wire (8) and 1P connector (6) from the fuel level
sensor (7).
(1) Fuel Tank Cover
(2) Sponge
(3) Steering Controller Cover
(4) OPC Controller Connector
7-S7
STEERING
(4) Hazard Switch Connector
(5) Under Cover
(6) Combination Switch Connector
9Y1211109ENS0023US0
(5) Fuel Sensor Cover
(6) 1P Connector
(7) Fuel Sensor
(8) Grounding Wire
9Y1211109ENS0024US0
KiSC issued 11, 2014 A