wsm STW37 Workshop Manual page 296

STW34, STW37, STW40, WSM
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to "5. TIGHTENING TORQUES" on page G-10.)
Rear wheel mounting screw and nut
ROPS mounting bolt and nut
Fender mounting screw
Hydraulic hoses PB, P and T retaining nuts
Joint stay mounting screw (M12)
Rear frame mounting screw (M12)
Bracket mounting screw M12
Cabin mounting bolt and nut
Brake case mounting screw
Stopper mounting screw
Item N·m
196.1 to 225.6
167 to 197
197 to 225
30 to 40
103.0 to 117.7 10.51 to 12.00
77.5 to 90.2
63 to 72
124 to 147
39.3 to 44.1
48.1 to 55.9
4-S3
REAR AXLE
kgf·m lbf·ft
20.0 to 23.0 145 to 166
17.0 to 20.0 123 to 144
20.0 to 23.0 145 to 166
3.0 to 4.0 21.7 to 28.9
75.97 to 86.81
7.9 to 9.2 57.1 to 66.5
6.4 to 7.4 47 to 53
12.6 to 15.0 91.1 to 108
4.0 to 4.5 29.0 to 32.5
4.9 to 5.7 35.4 to 41.2
9Y1211109RAS0005US0
KiSC issued 11, 2014 A