wsm STW37 Workshop Manual page 304

STW34, STW37, STW40, WSM
Rear Wheel and 3-Point Linkage
1. Place the disassembling stand under the transmission case.
2. Remove the rear wheels (1).
3. Remove the top link (2), lift rods (3) and lower links (4).
4. Remove the drawbar (5).
Rear wheel mounting
Tightening torque
screw and nut
(1) Rear Wheel
(2) Top Link
(3) Lift Rod
Lever Grip
1. Remove the cruise control lever grip (1).
2. Remove the range gear shift lever grip (2).
(1) Cruise Control Lever Grip
Fender Assembly
1. Remove the fender cover (1).
2. Remove the sponges (4), (5).
(When reassembling)
• Assemble the sponge (center) (4) between the cruise control
lever (2) and range gear shift lever (6).
(1) Fender Cover
(2) Cruise Control Lever
(3) Sponge (Inner)
4-S11
REAR AXLE
196.1 to 225.6 N·m
20.0 to 23.0 kgf·m
145 to 166 lbf·ft
(4) Lower Link
(5) Drawbar
9Y1211109ENS0037US0
(2) Range Gear Shift Lever Grip
9Y1211109RAS0009US0
(4) Sponge (Center)
(5) Sponge (Outer)
(6) Range Gear Shift Lever
9Y1211109ENS0046US0
KiSC issued 11, 2014 A