wsm STW37 Workshop Manual page 235

STW34, STW37, STW40, WSM
Seat, Seat Under Cover and Step
1. Disconnect the seat switch connector (9) and then remove the
seat (3).
2. Remove the step mat (6).
3. Remove the grips of the mid PTO lever (4) and front wheel drive
lever (5).
4. Remove the lowering speed adjusting knob (2).
5. Remove the seat under cover (1).
6. Remove the stay (8).
7. Remove the step (7).
(When reassembling)
• Do not confuse the grips.
– Grip (yellow) for the mid PTO lever.
– Grip (red) for the front wheel drive lever.
(1) Seat Under Cover
(2) Lowering Speed Adjusting Knob
(3) Seat
(4) Mid PTO Lever
(5) Front Wheel Driver Lever
Rear Wheel
1. Place the disassembling stand under the rear axles.
2. Remove the rear wheels (1).
3. Remove the Registration plate (3) with trailer electrical outlet
(2).
4. Remove the combination lights (4)
Rear wheel mounting
Tightening torque
screw and nut
(1) Rear Wheel
(2) Trailer Electrical Outlet
3-S21
TRANSMISSION
(6) Step Mat
(7) Step
(8) Stay
(9) Seat Switch Connector
9Y1211109TRS0016US0
196.1 to 225.6 N·m
20.0 to 23.0 kgf·m
145 to 166 lbf·ft
(3) Registration Plate
(4) Combination Light
9Y1211109TRS0017US0
KiSC issued 11, 2014 A