wsm STW37 Workshop Manual page 546

STW34, STW37, STW40, WSM
Wiring Harness
1. Disconnect the temperature motor connector (3), and
thermostat connectors (4).
2. Disconnect the mode motor connector (2) and blower resister
(1) connector.
(1) Blower Resister
(2) Mode Motor Connector
Wire Cable, Temperature Motor and Mode Motor
1. Disconnect the wire cable (1).
2. Remove the motor mounting screws (2).
(1) Wire Cable
(2) Motor Mounting Screw
10-S47
(3) Temperature Motor Connector
(4) Thermostat Connector
9Y1211109CAS0062US0
L: 6 mm (0.2 in.)
9Y1211109CAS0063US0
KiSC issued 11, 2014 A
CABIN