wsm STW37 Workshop Manual page 123

STW34, STW37, STW40, WSM
Fuel Tank and Muffler
1. Remove the muffler (1).
2. Pull out the clamps (4).
3. Remove the screws (5), (6) and then remove the fuel tank (3)
with pillar (2).
4. Remove the retaining screw (7).
(When reassembling)
Tightening torque Muffler mounting screw
(1) Muffler
(2) Pillar
(3) Fuel Tank
(4) Clamp
Hydraulic Pipe and Hose
1. Disconnect the accelerator wire (3) from the engine.
2. Remove the retaining screws (7) and separate the 3P hydraulic
delivery pipe (6) from the hydraulic pump.
3. Disconnect the bi-speed delivery pipe (2) from the hydraulic
pump.
4. Remove the retaining screw (5), and then remove the oil cooler
pipe (4).
5. Disconnect the suction hose (1).
Bi-speed delivery pipe joint
screw (Pump side)
Tightening torque
Bi-speed delivery pipe
retaining nut
(Bi-speed valve side)
(1) Suction Hose
(2) Bi-speed Delivery Pipe
(3) Accelerator Wire
(4) Oil Cooler Pipe
1-S44
ENGINE
32 to 37 N·m
3.2 to 3.8 kgf·m
24 to 27 lbf·ft
(5) Screw
(6) Screw
(7) Retaining Screw
9Y1211109ENS0058US0
34.3 to 39.2 N·m
3.5 to 4.0 kgf·m
25.3 to 28.9 lbf·ft
29 to 49 N·m
3.0 to 5.0 kgf·m
21.7 to 36.2 lbf·ft
(5) Retaining Screw
(6) 3P Hydraulic Delivery Pipe
(7) Retaining Screw
9Y1211109ENS0059US0
KiSC issued 11, 2014 A