Front Hub And Disc (2Wd Model); Disassembled View; Disassembly - Isuzu 2000 Trooper Workshop Manual

4C–4
DRIVE SHAFT SYSTEM

Disassembled View

Legend
(1) Bolt
(2) Cover and Gasket
(3) Packing
(4) Lock Washer
(5) Hub Nut
(6) Outer Bearing

Disassembly

1. Before disassembly, jack up the front of vehicle and
support frame with jack stands.
2. Remove the two bolts from the rear side of the
knuckle arm, then remove the brake caliper, with the
brake hose attached.
Use a wire to attach the brake caliper to the upper link.
Refer to Disk Brakes in Brake section.

Front Hub and Disc (2WD Model)

(7) Hub and Disc Assembly
(8) ABS Sensor Ring
(9) Inner Bearing
(10) Oil Seal
(11) Bolt
(12) Wheel Pin
411RY00003