Isuzu 2000 Trooper Workshop Manual page 223

8. Loosen the inflator module fixing bolt from behind the
steering wheel assembly using a TORX
equivalent until the inflator module can be released
from steering assembly.
9. Disconnect the yellow 2-way SRS connector located
behind the inflator module.
POWER ASSISTED SYSTEM
10. Apply a setting mark (1) across the steering wheel
driver or and shaft so parts can be reassembled in their original
position.
11. Move the front wheels to the straight ahead position,
827RT008
then use steering wheel remover J–29752 to remove
the steering wheel.
CAUTION: Never apply force to the steering wheel
in direction of the shaft by using a hammer or other
impact tools in an attempt to remove the steering
wheel. The steering shaft is designed as an energy
absorbing unit.
827RW002
2A–55
430RW001
430RT009