Rear Axle Brake Hose; Rear Axle Brake Hose And Associated Parts; Removal; Installation - Isuzu 2000 Trooper Workshop Manual

5C–12 POWER ASSISTED BRAKE SYSTEM
Rear Axle Brake Hose and Associated
Parts
Legend
(1) Brake Pipe
(2) Clip
(3) Bolt
(4) Brake Pipe
(5) Hose

Removal

1. Raise the vehicle and support it with suitable safety
stands.
2. Remove wheel and tire assembly.
3. Clean dirt, grease, and other foreign material off the
hose fittings at both ends.
4. Disconnect brake pipe.
5. Remove clip.
6. Remove brake pipe.
7. Remove bolt.
8. Remove hose.

Rear Axle Brake Hose

Installation

To install, follow the removal steps in the reverse order,
noting the following points:
1. Tighten the brake pipes to the specified torque
Torque: 16 N·m (12 lb ft)
2. Tighten the bolt to the specified torque.
Sems bolts
Torque: 13 N·m (113 lb in)
Flange bolts
Torque: 15 N·m (11 lb ft)
After installing the brake hoses, bleed the brakes as
described in this section.
352RW002