Isuzu 2000 Trooper Workshop Manual page 269

D Install the rubber bushing by using to installer
J–39214.
NOTE: When mounting rubber bushings, be sure not to
use grease on bushings or any other nearby part.
Installation
1. Install center link. Make sure that the center link is in
its correct position.
NOTE: When mounting center link, be sure not to use
grease bushings or any other nearby part.
2. Install bolt and nut. Tighten the bolts and nuts lightly,
then retighten them to the specified torque after the
vehicle is at curb height.
Torque: 137 N·m (101 lb ft)
3. Install speed sensor cable bracket.
4. Install speed sensor cable.
901RW059
460RS010
REAR SUSPENSION
3D–9