Removal; Installation - Isuzu 2000 Trooper Workshop Manual

4B1–24
DRIVE LINE CONTROL SYSTEM (SHIFT ON THE FLY)

Removal

1. Remove lower cluster assembly and front console
assembly.
Refer to Interior Trim in Body and Accessories
section.
2. Remove nut.
3. Remove 4WD control unit.
4. Disconnect harness connector (1).
Legend
(1) Harness Connector

Installation

1. Connect harness connector, then install 4WD control
unit.
2. Install lower cluster assembly and front console
assembly.
412RW045