Installation - Isuzu 2000 Trooper Workshop Manual

6. Uncouple the shift control rod from the select lever
assembly.
7. Place the select lever assembly near the end.
8. Remove transfer control lever.
9. Remove breather hose.
10. Remove the exhaust pipe set bolts and nuts, and shift
the pipe to the end.
11. Remove the right cross member hanger and shift the
proper shaft to the end.
12. Unplug the 4WD switch connector from the
transmission harness.
13. Unplug the transfer connector from the top of the
transfer case.
14. Support the transfer case with a jack.
15. Remove the four bolts and three nuts from the
transfer case.
16. Remove transfer case assembly.

Installation

Pay attention to the following points.
1. Apply grease (Besco L2) or equivalent to the input
shaft spline.
256RW028
2. Mount the transfer case.
260RW006
TRANSFER CASE (TOD)
4D2–3
261RW024