Isuzu 2000 Trooper Workshop Manual page 584

4D2–28 TRANSFER CASE (TOD)
Tension of Lock-up Fork Spring
D If the measurement exceeds the limit, replace the
spring. (When compressed to 41.4 mm)
Standard : 27.1-33.8 N {2.76-3.45 kg}
Allowable limit : 24.5 N {2.5 kg}
Tension of Detent Spring Assembly
D If the measurement exceeds the limit, replace the
spring. N {kg} (When compressed by 3 mm from the
free length)
Standard : 139 N -203 {14.2-20.7 kg}
Allowable limit : 130 N {13.3 kg}
Oil Pump
D Remove foreign materials from the strainer. If the
strainer is damaged, replace it.
D If the area into which the shaft is inserted is
excessively worn or damaged, replace the pump.
Multi Plate Disk Clutch
D If the burned, mirror-surfaced clutch facing, or
scraping is observed on the clutch plates, clutch
housing, armature plate, and insulator washer,
replace the part or parts.
014RW048
Coil Assembly
D Check the resistance of the coil with a tester. If
defects are observed, replace the assembly.
* (ordinary temperature)
Standard : 1.4∼2.0 W
Allowable limit : 1.0∼5.0 W
261RW041
266RW003
261RW031