Isuzu 2000 Trooper Workshop Manual page 254

Table of Contents

Advertisement

13. Install rear nut and washer and tighten lower link nut
finger–tight.
NOTE: Torque lower control arm nut after adjusting buffer
clearance.
Buffer clearance: 20 mm (0.79 in)
Torque: 196 N·m (145 lb ft)
14. Install front nut and washer then tighten lower link nut
finger-tight.
NOTE: Torque lower control arm nut after adjusting buffer
clearance .
Buffer clearance: 20 mm (0.79 in)
Torque: 157 N·m (116 lb ft)
NOTE: Adjust the trim height. Refer to Front End
Alignment Inspection and Adjustment in Steering section.
450RS012
450RS012
FRONT SUSPENSION
3C 21

Advertisement

Table of Contents
loading

Table of Contents