Isuzu 2000 Trooper Workshop Manual page 267

D Install the rubber bushing by using installer
J–39214.
NOTE: When mounting rubber bushings, be sure not to
use grease on bushings or any other nearby part.
Installation
1. Install trailing link. Make sure that the trailing link is in
its correct position.
NOTE: When mounting trailing link, be sure not to use
grease on bushings or any other nearby part.
2. Install bolt and nut. Tighten the bolts and nuts lightly,
then retighten them to the specified torque after the
vehicle is at curb height.
Torque: 137 N·m (101 lb ft)
3. Install parking brake cable.
CAUTION: The parking brake cable should not be
overstrained or slackened.
901RW059
460RS008
REAR SUSPENSION
3D–7